ffplay Documentation

1 Synopsis
2 Description
3 Options
4 See Also
5 Authors

2 Description

FFplay is a very simple and portable media player using the FFmpeg libraries and the SDL library. It is mostly used as a testbed for the various FFmpeg APIs.

3 Options

All the numerical options, if not specified otherwise, accept a string representing a number as input, which may be followed by one of the SI unit prefixes, for example: ’K’, ’M’, or ’G’.

If ’i’ is appended to the SI unit prefix, the complete prefix will be interpreted as a unit prefix for binary multiples, which are based on powers of 1024 instead of powers of 1000. Appending ’B’ to the SI unit prefix multiplies the value by 8. This allows using, for example: ’KB’, ’MiB’, ’G’ and ’B’ as number suffixes.

Options which do not take arguments are boolean options, and set the corresponding value to true. They can be set to false by prefixing the option name with "no". For example using "-nofoo" will set the boolean option with name "foo" to false.

Options that take arguments support a special syntax where the argument given on the command line is interpreted as a path to the file from which the actual argument value is loaded. To use this feature, add a forward slash ’/’ immediately before the option name (after the leading dash). E.g.

ffmpeg -i INPUT -/filter:v filter.script OUTPUT

will load a filtergraph description from the file named filter.script.

3.1 Stream specifiers

Some options are applied per-stream, e.g. bitrate or codec. Stream specifiers are used to precisely specify which stream(s) a given option belongs to.

A stream specifier is a string generally appended to the option name and separated from it by a colon. E.g. -codec:a:1 ac3 contains the a:1 stream specifier, which matches the second audio stream. Therefore, it would select the ac3 codec for the second audio stream.

A stream specifier can match several streams, so that the option is applied to all of them. E.g. the stream specifier in -b:a 128k matches all audio streams.

An empty stream specifier matches all streams. For example, -codec copy or -codec: copy would copy all the streams without reencoding.

Possible forms of stream specifiers are:

stream_index

Matches the stream with this index. E.g. -threads:1 4 would set the thread count for the second stream to 4. If stream_index is used as an additional stream specifier (see below), then it selects stream number stream_index from the matching streams. Stream numbering is based on the order of the streams as detected by libavformat except when a stream group specifier or program ID is also specified. In this case it is based on the ordering of the streams in the group or program.

stream_type[:additional_stream_specifier]

stream_type is one of following: ’v’ or ’V’ for video, ’a’ for audio, ’s’ for subtitle, ’d’ for data, and ’t’ for attachments. ’v’ matches all video streams, ’V’ only matches video streams which are not attached pictures, video thumbnails or cover arts. If additional_stream_specifier is used, then it matches streams which both have this type and match the additional_stream_specifier. Otherwise, it matches all streams of the specified type.

g:group_specifier[:additional_stream_specifier]

Matches streams which are in the group with the specifier group_specifier. if additional_stream_specifier is used, then it matches streams which both are part of the group and match the additional_stream_specifier. group_specifier may be one of the following:

group_index: Match the stream with this group index.
#group_id or i:group_id: Match the stream with this group id.

p:program_id[:additional_stream_specifier]

Matches streams which are in the program with the id program_id. If additional_stream_specifier is used, then it matches streams which both are part of the program and match the additional_stream_specifier.

#stream_id or i:stream_id

Match the stream by stream id (e.g. PID in MPEG-TS container).

m:key[:value]

Matches streams with the metadata tag key having the specified value. If value is not given, matches streams that contain the given tag with any value. The colon character ’:’ in key or value needs to be backslash-escaped.

disp:dispositions[:additional_stream_specifier]

Matches streams with the given disposition(s). dispositions is a list of one or more dispositions (as printed by the -dispositions option) joined with ’+’.

u

Matches streams with usable configuration, the codec must be defined and the essential information such as video dimension or audio sample rate must be present.

Note that in ffmpeg, matching by metadata will only work properly for input files.

3.2 Generic options

These options are shared amongst the ff* tools.

-L

Show license.

-h, -?, -help, --help [arg]

Show help. An optional parameter may be specified to print help about a specific item. If no argument is specified, only basic (non advanced) tool options are shown.

Possible values of arg are:

long: Print advanced tool options in addition to the basic tool options.
full: Print complete list of options, including shared and private options for encoders, decoders, demuxers, muxers, filters, etc.
decoder=decoder_name: Print detailed information about the decoder named decoder_name. Use the -decoders option to get a list of all decoders.
encoder=encoder_name: Print detailed information about the encoder named encoder_name. Use the -encoders option to get a list of all encoders.
demuxer=demuxer_name: Print detailed information about the demuxer named demuxer_name. Use the -formats option to get a list of all demuxers and muxers.
muxer=muxer_name: Print detailed information about the muxer named muxer_name. Use the -formats option to get a list of all muxers and demuxers.
filter=filter_name: Print detailed information about the filter named filter_name. Use the -filters option to get a list of all filters.
bsf=bitstream_filter_name: Print detailed information about the bitstream filter named bitstream_filter_name. Use the -bsfs option to get a list of all bitstream filters.
protocol=protocol_name: Print detailed information about the protocol named protocol_name. Use the -protocols option to get a list of all protocols.

-version

Show version.

-buildconf

Show the build configuration, one option per line.

-formats

Show available formats (including devices).

-demuxers

Show available demuxers.

-muxers

Show available muxers.

-devices

Show available devices.

-codecs

Show all codecs known to libavcodec.

Note that the term ’codec’ is used throughout this documentation as a shortcut for what is more correctly called a media bitstream format.

-decoders

Show available decoders.

-encoders

Show all available encoders.

-bsfs

Show available bitstream filters.

-protocols

Show available protocols.

-filters

Show available libavfilter filters.

-pix_fmts

Show available pixel formats.

-sample_fmts

Show available sample formats.

-layouts

Show channel names and standard channel layouts.

-dispositions

Show stream dispositions.

-colors

Show recognized color names.

-sources device[,opt1=val1[,opt2=val2]...]

Show autodetected sources of the input device. Some devices may provide system-dependent source names that cannot be autodetected. The returned list cannot be assumed to be always complete.

ffmpeg -sources pulse,server=192.168.0.4

-sinks device[,opt1=val1[,opt2=val2]...]

Show autodetected sinks of the output device. Some devices may provide system-dependent sink names that cannot be autodetected. The returned list cannot be assumed to be always complete.

ffmpeg -sinks pulse,server=192.168.0.4

-loglevel [flags+]loglevel | -v [flags+]loglevel

Set logging level and flags used by the library.

The optional flags prefix can consist of the following values:

‘repeat’: Indicates that repeated log output should not be compressed to the first line and the "Last message repeated n times" line will be omitted.
‘level’: Indicates that log output should add a [level] prefix to each message line. This can be used as an alternative to log coloring, e.g. when dumping the log to file.

Flags can also be used alone by adding a ’+’/’-’ prefix to set/reset a single flag without affecting other flags or changing loglevel. When setting both flags and loglevel, a ’+’ separator is expected between the last flags value and before loglevel.

loglevel is a string or a number containing one of the following values:

‘quiet, -8’: Show nothing at all; be silent.
‘panic, 0’: Only show fatal errors which could lead the process to crash, such as an assertion failure. This is not currently used for anything.
‘fatal, 8’: Only show fatal errors. These are errors after which the process absolutely cannot continue.
‘error, 16’: Show all errors, including ones which can be recovered from.
‘warning, 24’: Show all warnings and errors. Any message related to possibly incorrect or unexpected events will be shown.
‘info, 32’: Show informative messages during processing. This is in addition to warnings and errors. This is the default value.
‘verbose, 40’: Same as info, except more verbose.
‘debug, 48’: Show everything, including debugging information.
‘trace, 56’

For example to enable repeated log output, add the level prefix, and set loglevel to verbose:

ffmpeg -loglevel repeat+level+verbose -i input output

Another example that enables repeated log output without affecting current state of level prefix flag or loglevel:

ffmpeg [...] -loglevel +repeat

By default the program logs to stderr. If coloring is supported by the terminal, colors are used to mark errors and warnings. Log coloring can be disabled setting the environment variable AV_LOG_FORCE_NOCOLOR, or can be forced setting the environment variable AV_LOG_FORCE_COLOR.

-report

Dump full command line and log output to a file named program-YYYYMMDD-HHMMSS.log in the current directory. This file can be useful for bug reports. It also implies -loglevel debug.

Setting the environment variable FFREPORT to any value has the same effect. If the value is a ’:’-separated key=value sequence, these options will affect the report; option values must be escaped if they contain special characters or the options delimiter ’:’ (see the “Quoting and escaping” section in the ffmpeg-utils manual).

The following options are recognized:

file: set the file name to use for the report; %p is expanded to the name of the program, %t is expanded to a timestamp, %% is expanded to a plain %
level: set the log verbosity level using a numerical value (see -loglevel).

For example, to output a report to a file named ffreport.log using a log level of 32 (alias for log level info):

FFREPORT=file=ffreport.log:level=32 ffmpeg -i input output

Errors in parsing the environment variable are not fatal, and will not appear in the report.

-hide_banner

Suppress printing banner.

All FFmpeg tools will normally show a copyright notice, build options and library versions. This option can be used to suppress printing this information.

-cpuflags flags (global)

Allows setting and clearing cpu flags. This option is intended for testing. Do not use it unless you know what you’re doing.

ffmpeg -cpuflags -sse+mmx ...
ffmpeg -cpuflags mmx ...
ffmpeg -cpuflags 0 ...

Possible flags for this option are:

‘x86’

‘mmx’
‘mmxext’
‘sse’
‘sse2’
‘sse2slow’
‘sse3’
‘sse3slow’
‘ssse3’
‘atom’
‘sse4.1’
‘sse4.2’
‘avx’
‘avx2’
‘xop’
‘fma3’
‘fma4’
‘3dnow’
‘3dnowext’
‘bmi1’
‘bmi2’
‘cmov’

‘ARM’

‘armv5te’
‘armv6’
‘armv6t2’
‘vfp’
‘vfpv3’
‘neon’
‘setend’

‘AArch64’

‘armv8’
‘vfp’
‘neon’

‘PowerPC’

‘altivec’

‘Specific Processors’

‘pentium2’
‘pentium3’
‘pentium4’
‘k6’
‘k62’
‘athlon’
‘athlonxp’
‘k8’

-cpucount count (global)

Override detection of CPU count. This option is intended for testing. Do not use it unless you know what you’re doing.

ffmpeg -cpucount 2

-max_alloc bytes

Set the maximum size limit for allocating a block on the heap by ffmpeg’s family of malloc functions. Exercise extreme caution when using this option. Don’t use if you do not understand the full consequence of doing so. Default is INT_MAX.

3.3 AVOptions

These options are provided directly by the libavformat, libavdevice and libavcodec libraries. To see the list of available AVOptions, use the -help option. They are separated into two categories:

generic: These options can be set for any container, codec or device. Generic options are listed under AVFormatContext options for containers/devices and under AVCodecContext options for codecs.
private: These options are specific to the given container, device or codec. Private options are listed under their corresponding containers/devices/codecs.

For example to write an ID3v2.3 header instead of a default ID3v2.4 to an MP3 file, use the id3v2_version private option of the MP3 muxer:

ffmpeg -i input.flac -id3v2_version 3 out.mp3

All codec AVOptions are per-stream, and thus a stream specifier should be attached to them:

ffmpeg -i multichannel.mxf -map 0:v:0 -map 0:a:0 -map 0:a:0 -c:a:0 ac3 -b:a:0 640k -ac:a:1 2 -c:a:1 aac -b:2 128k out.mp4

In the above example, a multichannel audio stream is mapped twice for output. The first instance is encoded with codec ac3 and bitrate 640k. The second instance is downmixed to 2 channels and encoded with codec aac. A bitrate of 128k is specified for it using absolute index of the output stream.

Note: the -nooption syntax cannot be used for boolean AVOptions, use -option 0/-option 1.

Note: the old undocumented way of specifying per-stream AVOptions by prepending v/a/s to the options name is now obsolete and will be removed soon.

3.4 Main options

-x width

Force displayed width.

-y height

Force displayed height.

-fs

Start in fullscreen mode.

-an

Disable audio.

-vn

Disable video.

-sn

Disable subtitles.

-ss pos

Seek to pos. Note that in most formats it is not possible to seek exactly, so ffplay will seek to the nearest seek point to pos.

pos must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual.

-t duration

Play duration seconds of audio/video.

duration must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual.

-bytes

Seek by bytes.

-seek_interval

Set custom interval, in seconds, for seeking using left/right keys. Default is 10 seconds.

-nodisp

Disable graphical display.

-noborder

Borderless window.

-alwaysontop

Window always on top. Available on: X11 with SDL >= 2.0.5, Windows SDL >= 2.0.6.

-volume

Set the startup volume. 0 means silence, 100 means no volume reduction or amplification. Negative values are treated as 0, values above 100 are treated as 100.

-f fmt

Force format.

-window_title title

Set window title (default is the input filename).

-left title

Set the x position for the left of the window (default is a centered window).

-top title

Set the y position for the top of the window (default is a centered window).

-loop number

Loops movie playback <number> times. 0 means forever.

-showmode mode

Set the show mode to use. Available values for mode are:

‘0, video’: show video
‘1, waves’: show audio waves
‘2, rdft’: show audio frequency band using RDFT ((Inverse) Real Discrete Fourier Transform)

Default value is "video", if video is not present or cannot be played "rdft" is automatically selected.

You can interactively cycle through the available show modes by pressing the key w.

-vf filtergraph

Create the filtergraph specified by filtergraph and use it to filter the video stream.

filtergraph is a description of the filtergraph to apply to the stream, and must have a single video input and a single video output. In the filtergraph, the input is associated to the label in, and the output to the label out. See the ffmpeg-filters manual for more information about the filtergraph syntax.

You can specify this parameter multiple times and cycle through the specified filtergraphs along with the show modes by pressing the key w.

-af filtergraph

filtergraph is a description of the filtergraph to apply to the input audio. Use the option "-filters" to show all the available filters (including sources and sinks).

-i input_url

Read input_url.

3.5 Advanced options

-stats: Print several playback statistics, in particular show the stream duration, the codec parameters, the current position in the stream and the audio/video synchronisation drift. It is shown by default, unless the log level is lower than info. Its display can be forced by manually specifying this option. To disable it, you need to specify -nostats.
-fast: Non-spec-compliant optimizations.
-genpts: Generate pts.
-sync type: Set the master clock to audio (type=audio), video (type=video) or external (type=ext). Default is audio. The master clock is used to control audio-video synchronization. Most media players use audio as master clock, but in some cases (streaming or high quality broadcast) it is necessary to change that. This option is mainly used for debugging purposes.
-ast audio_stream_specifier: Select the desired audio stream using the given stream specifier. The stream specifiers are described in the Stream specifiers chapter. If this option is not specified, the "best" audio stream is selected in the program of the already selected video stream.
-vst video_stream_specifier: Select the desired video stream using the given stream specifier. The stream specifiers are described in the Stream specifiers chapter. If this option is not specified, the "best" video stream is selected.
-sst subtitle_stream_specifier: Select the desired subtitle stream using the given stream specifier. The stream specifiers are described in the Stream specifiers chapter. If this option is not specified, the "best" subtitle stream is selected in the program of the already selected video or audio stream.
-autoexit: Exit when video is done playing.
-exitonkeydown: Exit if any key is pressed.
-exitonmousedown: Exit if any mouse button is pressed.
-codec:media_specifier codec_name: Force a specific decoder implementation for the stream identified by media_specifier, which can assume the values a (audio), v (video), and s subtitle.
-acodec codec_name: Force a specific audio decoder.
-vcodec codec_name: Force a specific video decoder.
-scodec codec_name: Force a specific subtitle decoder.
-autorotate: Automatically rotate the video according to file metadata. Enabled by default, use -noautorotate to disable it.
-framedrop: Drop video frames if video is out of sync. Enabled by default if the master clock is not set to video. Use this option to enable frame dropping for all master clock sources, use -noframedrop to disable it.
-infbuf: Do not limit the input buffer size, read as much data as possible from the input as soon as possible. Enabled by default for realtime streams, where data may be dropped if not read in time. Use this option to enable infinite buffers for all inputs, use -noinfbuf to disable it.
-filter_threads nb_threads: Defines how many threads are used to process a filter pipeline. Each pipeline will produce a thread pool with this many threads available for parallel processing. The default is 0 which means that the thread count will be determined by the number of available CPUs.
-enable_vulkan: Use vulkan renderer rather than SDL builtin renderer. Depends on libplacebo.
-vulkan_params: Vulkan configuration using a list of key=value pairs separated by ":".
-hwaccel: Use HW accelerated decoding. Enable this option will enable vulkan renderer automatically.

3.6 While playing

q, ESC

Quit.

f

Toggle full screen.

p, SPC

Pause.

m

Toggle mute.

9, 0

/, *

Decrease and increase volume respectively.

a

Cycle audio channel in the current program.

v

Cycle video channel.

t

Cycle subtitle channel in the current program.

c

Cycle program.

w

Cycle video filters or show modes.

s

Step to the next frame.

Pause if the stream is not already paused, step to the next video frame, and pause.

left/right

Seek backward/forward 10 seconds.

down/up

Seek backward/forward 1 minute.

page down/page up

Seek to the previous/next chapter. or if there are no chapters Seek backward/forward 10 minutes.

right mouse click

Seek to percentage in file corresponding to fraction of width.

left mouse double-click

Toggle full screen.

5 Authors

The FFmpeg developers.

For details about the authorship, see the Git history of the project (https://git.ffmpeg.org/ffmpeg), e.g. by typing the command git log in the FFmpeg source directory, or browsing the online repository at https://git.ffmpeg.org/ffmpeg.

Maintainers for the specific components are listed in the file MAINTAINERS in the source code tree.

This document was generated on November 9, 2024 using makeinfo.

Hosting provided by telepoint.bg

Table of Contents