Go to the documentation of this file.
23 #include <opus_multistream.h>
45 #ifdef OPUS_SET_PHASE_INVERSION_DISABLED_REQUEST
61 0, 1, 1, 2, 2, 2, 2, 3
72 { 0, 4, 1, 2, 3, 5, 6 },
73 { 0, 6, 1, 2, 3, 4, 5, 7 },
84 { 0, 1, 5, 6, 2, 4, 3 },
85 { 0, 1, 6, 7, 4, 5, 2, 3 },
89 int coupled_stream_count,
91 const uint8_t *channel_mapping)
97 bytestream_put_byte(&p, 1);
101 bytestream_put_le16(&p, 0);
104 bytestream_put_byte(&p, mapping_family);
105 if (mapping_family != 0) {
106 bytestream_put_byte(&p, stream_count);
107 bytestream_put_byte(&p, coupled_stream_count);
119 "Quality-based encoding not supported, "
120 "please specify a bitrate and VBR setting.\n");
124 ret = opus_multistream_encoder_ctl(enc, OPUS_SET_BITRATE(avctx->
bit_rate));
125 if (
ret != OPUS_OK) {
127 "Failed to set bitrate: %s\n", opus_strerror(
ret));
131 ret = opus_multistream_encoder_ctl(enc,
132 OPUS_SET_COMPLEXITY(
opts->complexity));
135 "Unable to set complexity: %s\n", opus_strerror(
ret));
137 ret = opus_multistream_encoder_ctl(enc, OPUS_SET_VBR(!!
opts->vbr));
140 "Unable to set VBR: %s\n", opus_strerror(
ret));
142 ret = opus_multistream_encoder_ctl(enc,
143 OPUS_SET_VBR_CONSTRAINT(
opts->vbr == 2));
146 "Unable to set constrained VBR: %s\n", opus_strerror(
ret));
148 ret = opus_multistream_encoder_ctl(enc,
149 OPUS_SET_PACKET_LOSS_PERC(
opts->packet_loss));
152 "Unable to set expected packet loss percentage: %s\n",
155 ret = opus_multistream_encoder_ctl(enc,
156 OPUS_SET_INBAND_FEC(
opts->fec));
159 "Unable to set inband FEC: %s\n",
163 ret = opus_multistream_encoder_ctl(enc,
164 OPUS_SET_MAX_BANDWIDTH(
opts->max_bandwidth));
167 "Unable to set maximum bandwidth: %s\n", opus_strerror(
ret));
170 #ifdef OPUS_SET_PHASE_INVERSION_DISABLED_REQUEST
171 ret = opus_multistream_encoder_ctl(enc,
172 OPUS_SET_PHASE_INVERSION_DISABLED(!
opts->apply_phase_inv));
175 "Unable to set phase inversion: %s\n",
197 "No channel layout specified. Opus encoder will use Vorbis "
204 "Invalid channel layout %s for specified mapping family %d.\n",
205 name, mapping_family);
216 const uint8_t ** channel_map_result)
221 switch (mapping_family) {
249 "Unknown channel mapping family %d. Output channel layout may be invalid.\n",
262 uint8_t libopus_channel_mapping[255];
266 int coupled_stream_count, header_size,
frame_size;
275 "LPC mode cannot be used with a frame duration of less "
276 "than 10ms. Enabling restricted low-delay mode.\n"
277 "Use a longer frame duration if this is not what you want.\n");
285 #ifdef OPUS_FRAMESIZE_120_MS
295 "Frame duration must be exactly one of: 2.5, 5, 10, 20, 40"
296 #ifdef OPUS_FRAMESIZE_120_MS
297 ", 60, 80, 100 or 120.\n",
307 "Compression level must be in the range 0 to 10. "
308 "Defaulting to 10.\n");
333 "Invalid frequency cutoff: %d. Using default maximum bandwidth.\n"
334 "Cutoff frequency must be exactly one of: 4000, 6000, 8000, 12000 or 20000.\n",
352 mapping_family =
channels > 2 ? 1 : 0;
355 memcpy(libopus_channel_mapping,
357 channels *
sizeof(*libopus_channel_mapping));
359 enc = opus_multistream_encoder_create(
361 coupled_stream_count,
369 enc = opus_multistream_surround_encoder_create(
371 &opus->
stream_count, &coupled_stream_count, libopus_channel_mapping,
375 if (
ret != OPUS_OK) {
377 "Failed to create encoder: %s\n", opus_strerror(
ret));
384 32000 * coupled_stream_count;
386 "No bit rate set. Defaulting to %"PRId64
" bps.\n", avctx->
bit_rate);
391 "Please choose a value between 500 and %d.\n", avctx->
bit_rate,
398 if (
ret != OPUS_OK) {
404 header_size = 19 + (mapping_family == 0 ? 0 : 2 +
channels);
424 "Unable to get number of lookahead samples: %s\n",
428 mapping_family, libopus_channel_mapping);
437 opus_multistream_encoder_destroy(enc);
443 int nb_channels,
int nb_samples,
int bytes_per_sample) {
447 const size_t src_pos = bytes_per_sample * (nb_channels *
sample +
channel);
450 memcpy(&dst[dst_pos], &
src[src_pos], bytes_per_sample);
461 const int sample_size =
channels * bytes_per_sample;
462 const uint8_t *audio;
494 ret = opus_multistream_encode_float(opus->
enc, (
const float *)audio,
498 ret = opus_multistream_encode(opus->
enc, (
const opus_int16 *)audio,
504 "Error encoding frame: %s\n", opus_strerror(
ret));
515 if ((discard_padding < opus->
opts.packet_size) != (avpkt->
duration > 0))
517 if (discard_padding > 0) {
523 AV_WL32(side_data + 4, discard_padding);
535 opus_multistream_encoder_destroy(opus->
enc);
544 #define OFFSET(x) offsetof(LibopusEncContext, opts.x)
545 #define FLAGS AV_OPT_FLAG_AUDIO_PARAM | AV_OPT_FLAG_ENCODING_PARAM
547 {
"application",
"Intended application type",
OFFSET(application),
AV_OPT_TYPE_INT, { .i64 = OPUS_APPLICATION_AUDIO }, OPUS_APPLICATION_VOIP, OPUS_APPLICATION_RESTRICTED_LOWDELAY,
FLAGS, .unit =
"application" },
548 {
"voip",
"Favor improved speech intelligibility", 0,
AV_OPT_TYPE_CONST, { .i64 = OPUS_APPLICATION_VOIP }, 0, 0,
FLAGS, .unit =
"application" },
549 {
"audio",
"Favor faithfulness to the input", 0,
AV_OPT_TYPE_CONST, { .i64 = OPUS_APPLICATION_AUDIO }, 0, 0,
FLAGS, .unit =
"application" },
550 {
"lowdelay",
"Restrict to only the lowest delay modes, disable voice-optimized modes", 0,
AV_OPT_TYPE_CONST, { .i64 = OPUS_APPLICATION_RESTRICTED_LOWDELAY }, 0, 0,
FLAGS, .unit =
"application" },
551 {
"frame_duration",
"Duration of a frame in milliseconds",
OFFSET(frame_duration),
AV_OPT_TYPE_FLOAT, { .dbl = 20.0 }, 2.5, 120.0,
FLAGS },
558 {
"mapping_family",
"Channel Mapping Family",
OFFSET(mapping_family),
AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 255,
FLAGS, .unit =
"mapping_family" },
559 #ifdef OPUS_SET_PHASE_INVERSION_DISABLED_REQUEST
560 {
"apply_phase_inv",
"Apply intensity stereo phase inversion",
OFFSET(apply_phase_inv),
AV_OPT_TYPE_BOOL, { .i64 = 1 }, 0, 1,
FLAGS },
574 {
"compression_level",
"10" },
579 48000, 24000, 16000, 12000, 8000, 0,
600 .p.wrapper_name =
"libopus",
const FFCodec ff_libopus_encoder
static const AVClass libopus_class
int frame_size
Number of samples per channel in an audio frame.
#define AV_LOG_WARNING
Something somehow does not look correct.
it s the only field you need to keep assuming you have a context There is some magic you don t need to care about around this just let it vf default minimum maximum flags name is the option name
static int libopus_encode(AVCodecContext *avctx, AVPacket *avpkt, const AVFrame *frame, int *got_packet_ptr)
Filter the word “frame” indicates either a video frame or a group of audio as stored in an AVFrame structure Format for each input and each output the list of supported formats For video that means pixel format For audio that means channel sample they are references to shared objects When the negotiation mechanism computes the intersection of the formats supported at each end of a all references to both lists are replaced with a reference to the intersection And when a single format is eventually chosen for a link amongst the remaining all references to the list are updated That means that if a filter requires that its input and output have the same format amongst a supported all it has to do is use a reference to the same list of formats query_formats can leave some formats unset and return AVERROR(EAGAIN) to cause the negotiation mechanism toagain later. That can be used by filters with complex requirements to use the format negotiated on one link to set the formats supported on another. Frame references ownership and permissions
void ff_af_queue_remove(AudioFrameQueue *afq, int nb_samples, int64_t *pts, int64_t *duration)
Remove frame(s) from the queue.
@ OPUS_BANDWIDTH_NARROWBAND
int sample_rate
samples per second
void ff_af_queue_close(AudioFrameQueue *afq)
Close AudioFrameQueue.
av_cold void ff_af_queue_init(AVCodecContext *avctx, AudioFrameQueue *afq)
Initialize AudioFrameQueue.
This structure describes decoded (raw) audio or video data.
#define FF_CODEC_CAP_NOT_INIT_THREADSAFE
The codec is not known to be init-threadsafe (i.e.
int64_t duration
Duration of this packet in AVStream->time_base units, 0 if unknown.
@ OPUS_BANDWIDTH_FULLBAND
enum AVChannelOrder order
Channel order used in this layout.
static const uint8_t opus_vorbis_channel_map[8][8]
int nb_channels
Number of channels in this layout.
uint8_t * data[AV_NUM_DATA_POINTERS]
pointer to the picture/channel planes.
static av_cold int libopus_encode_init(AVCodecContext *avctx)
AVCodec p
The public AVCodec.
AVChannelLayout ch_layout
Audio channel layout.
void av_shrink_packet(AVPacket *pkt, int size)
Reduce packet size, correctly zeroing padding.
int initial_padding
Audio only.
#define FF_CODEC_ENCODE_CB(func)
int ff_af_queue_add(AudioFrameQueue *afq, const AVFrame *f)
Add a frame to the queue.
#define AV_LOG_ERROR
Something went wrong and cannot losslessly be recovered.
#define FF_ARRAY_ELEMS(a)
int av_channel_layout_describe(const AVChannelLayout *channel_layout, char *buf, size_t buf_size)
Get a human-readable string describing the channel layout properties.
static av_cold int libopus_encode_close(AVCodecContext *avctx)
int global_quality
Global quality for codecs which cannot change it per frame.
@ AV_CHANNEL_ORDER_UNSPEC
Only the channel count is specified, without any further information about the channel order.
static void libopus_write_header(AVCodecContext *avctx, int stream_count, int coupled_stream_count, int mapping_family, const uint8_t *channel_mapping)
static const uint8_t channel_map[8][8]
int ff_opus_error_to_averror(int err)
#define CODEC_LONG_NAME(str)
@ OPUS_BANDWIDTH_WIDEBAND
#define LIBAVUTIL_VERSION_INT
Describe the class of an AVClass context structure.
static int libopus_configure_encoder(AVCodecContext *avctx, OpusMSEncoder *enc, LibopusEncOpts *opts)
int64_t bit_rate
the average bitrate
const char * av_default_item_name(void *ptr)
Return the context name.
static const AVOption libopus_options[]
@ OPUS_BANDWIDTH_SUPERWIDEBAND
int(* init)(AVBSFContext *ctx)
#define AV_CODEC_CAP_DR1
Codec uses get_buffer() or get_encode_buffer() for allocating buffers and supports custom allocators.
enum AVSampleFormat sample_fmt
audio sample format
const uint8_t * encoder_channel_map
int av_channel_layout_compare(const AVChannelLayout *chl, const AVChannelLayout *chl1)
Check whether two channel layouts are semantically the same, i.e.
const uint8_t ff_vorbis_channel_layout_offsets[8][8]
#define av_assert2(cond)
assert() equivalent, that does lie in speed critical code.
static av_always_inline void bytestream_put_buffer(uint8_t **b, const uint8_t *src, unsigned int size)
int nb_samples
number of audio samples (per channel) described by this frame
int64_t pts
Presentation timestamp in AVStream->time_base units; the time at which the decompressed packet will b...
int av_get_bytes_per_sample(enum AVSampleFormat sample_fmt)
Return number of bytes per sample.
uint8_t * extradata
some codecs need / can use extradata like Huffman tables.
int cutoff
Audio cutoff bandwidth (0 means "automatic")
AVSampleFormat
Audio sample formats.
@ AV_SAMPLE_FMT_S16
signed 16 bits
const char * name
Name of the codec implementation.
void * av_calloc(size_t nmemb, size_t size)
static int libopus_check_max_channels(AVCodecContext *avctx, int max_channels)
const char * class_name
The name of the class; usually it is the same name as the context structure type to which the AVClass...
static const FFCodecDefault libopus_defaults[]
#define AV_INPUT_BUFFER_PADDING_SIZE
static int libopus_check_vorbis_layout(AVCodecContext *avctx, int mapping_family)
main external API structure.
uint8_t * av_packet_new_side_data(AVPacket *pkt, enum AVPacketSideDataType type, size_t size)
Allocate new information of a packet.
@ AV_PKT_DATA_SKIP_SAMPLES
Recommmends skipping the specified number of samples.
#define AV_CODEC_CAP_DELAY
Encoder or decoder requires flushing with NULL input at the end in order to give the complete and cor...
const AVChannelLayout ff_vorbis_ch_layouts[9]
@ OPUS_BANDWIDTH_MEDIUMBAND
This structure stores compressed data.
#define AV_CODEC_CAP_SMALL_LAST_FRAME
Codec can be fed a final frame with a smaller size.
static int libopus_validate_layout_and_get_channel_map(AVCodecContext *avctx, int mapping_family, const uint8_t **channel_map_result)
static const uint8_t libavcodec_libopus_channel_map[8][8]
int ff_alloc_packet(AVCodecContext *avctx, AVPacket *avpkt, int64_t size)
Check AVPacket size and allocate data.
static void libopus_copy_samples_with_channel_map(uint8_t *dst, const uint8_t *src, const uint8_t *channel_map, int nb_channels, int nb_samples, int bytes_per_sample)
static const uint8_t opus_coupled_streams[8]
static const int libopus_sample_rates[]