|
FFmpeg
|
All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
|
FFmpeg
|
#include <ac3dsp.h>
Data Fields | |
| void(* | ac3_exponent_min )(uint8_t *exp, int num_reuse_blocks, int nb_coefs) |
| Set each encoded exponent in a block to the minimum of itself and the exponents in the same frequency bin of up to 5 following blocks. More... | |
| int(* | ac3_max_msb_abs_int16 )(const int16_t *src, int len) |
| Calculate the maximum MSB of the absolute value of each element in an array of int16_t. More... | |
| void(* | ac3_lshift_int16 )(int16_t *src, unsigned int len, unsigned int shift) |
| Left-shift each value in an array of int16_t by a specified amount. More... | |
| void(* | ac3_rshift_int32 )(int32_t *src, unsigned int len, unsigned int shift) |
| Right-shift each value in an array of int32_t by a specified amount. More... | |
| void(* | float_to_fixed24 )(int32_t *dst, const float *src, unsigned int len) |
| Convert an array of float in range [-1.0,1.0] to int32_t with range [-(1<<24),(1<<24)]. More... | |
| void(* | bit_alloc_calc_bap )(int16_t *mask, int16_t *psd, int start, int end, int snr_offset, int floor, const uint8_t *bap_tab, uint8_t *bap) |
| Calculate bit allocation pointers. More... | |
| void(* | update_bap_counts )(uint16_t mant_cnt[16], uint8_t *bap, int len) |
| Update bap counts using the supplied array of bap. More... | |
| int(* | compute_mantissa_size )(uint16_t mant_cnt[6][16]) |
| Calculate the number of bits needed to encode a set of mantissas. More... | |
| void(* | extract_exponents )(uint8_t *exp, int32_t *coef, int nb_coefs) |
| void(* | sum_square_butterfly_int32 )(int64_t sum[4], const int32_t *coef0, const int32_t *coef1, int len) |
| void(* | sum_square_butterfly_float )(float sum[4], const float *coef0, const float *coef1, int len) |
| int | out_channels |
| int | in_channels |
| void(* | downmix )(float **samples, float **matrix, int len) |
| void(* | downmix_fixed )(int32_t **samples, int16_t **matrix, int len) |
| void(* | apply_window_int16 )(int16_t *output, const int16_t *input, const int16_t *window, unsigned int len) |
| Apply symmetric window in 16-bit fixed-point. More... | |
Set each encoded exponent in a block to the minimum of itself and the exponents in the same frequency bin of up to 5 following blocks.
| exp | pointer to the start of the current block of exponents. constraints: align 16 |
| num_reuse_blocks | number of blocks that will reuse exponents from the current block. constraints: range 0 to 5 |
| nb_coefs | number of frequency coefficients. |
Definition at line 43 of file ac3dsp.h.
Referenced by encode_exponents(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and ff_ac3dsp_init_x86().
Calculate the maximum MSB of the absolute value of each element in an array of int16_t.
| src | input array constraints: align 16. values must be in range [-32767,32767] |
| len | number of values in the array constraints: multiple of 16 greater than 0 |
Definition at line 54 of file ac3dsp.h.
Referenced by ff_ac3dsp_init(), ff_ac3dsp_init_arm(), ff_ac3dsp_init_x86(), and normalize_samples().
Left-shift each value in an array of int16_t by a specified amount.
| src | input array constraints: align 16 |
| len | number of values in the array constraints: multiple of 32 greater than 0 |
| shift | left shift amount constraints: range [0,15] |
Definition at line 65 of file ac3dsp.h.
Referenced by ff_ac3dsp_init(), ff_ac3dsp_init_arm(), ff_ac3dsp_init_x86(), and normalize_samples().
Right-shift each value in an array of int32_t by a specified amount.
| src | input array constraints: align 16 |
| len | number of values in the array constraints: multiple of 16 greater than 0 |
| shift | right shift amount constraints: range [0,31] |
Definition at line 76 of file ac3dsp.h.
Referenced by ff_ac3dsp_init(), ff_ac3dsp_init_arm(), ff_ac3dsp_init_x86(), and scale_coefficients().
Convert an array of float in range [-1.0,1.0] to int32_t with range [-(1<<24),(1<<24)].
| dst | destination array of int32_t. constraints: 16-byte aligned |
| src | source array of float. constraints: 16-byte aligned |
| len | number of elements to convert. constraints: multiple of 32 greater than zero |
Definition at line 89 of file ac3dsp.h.
Referenced by apply_channel_coupling(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), ff_ac3dsp_init_mips(), ff_ac3dsp_init_x86(), and scale_coefficients().
| void(* AC3DSPContext::bit_alloc_calc_bap)(int16_t *mask, int16_t *psd, int start, int end, int snr_offset, int floor, const uint8_t *bap_tab, uint8_t *bap) |
Calculate bit allocation pointers.
The SNR is the difference between the masking curve and the signal. AC-3 uses this value for each frequency bin to allocate bits. The snroffset parameter is a global adjustment to the SNR for all bins.
| [in] | mask | masking curve |
| [in] | psd | signal power for each frequency bin |
| [in] | start | starting bin location |
| [in] | end | ending bin location |
| [in] | snr_offset | SNR adjustment |
| [in] | floor | noise floor |
| [in] | bap_tab | look-up table for bit allocation pointers |
| [out] | bap | bit allocation pointers |
Definition at line 106 of file ac3dsp.h.
Referenced by bit_alloc(), decode_audio_block(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and ff_ac3dsp_init_mips().
Update bap counts using the supplied array of bap.
| [out] | mant_cnt | bap counts for 1 block |
| [in] | bap | array of bap, pointing to start coef bin |
| [in] | len | number of elements to process |
Definition at line 117 of file ac3dsp.h.
Referenced by count_mantissa_bits_update_ch(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and ff_ac3dsp_init_mips().
| int(* AC3DSPContext::compute_mantissa_size)(uint16_t mant_cnt[6][16]) |
Calculate the number of bits needed to encode a set of mantissas.
| [in] | mant_cnt | bap counts for all blocks |
Definition at line 125 of file ac3dsp.h.
Referenced by count_mantissa_bits(), ff_ac3dsp_init(), and ff_ac3dsp_init_x86().
Definition at line 127 of file ac3dsp.h.
Referenced by apply_channel_coupling(), extract_exponents(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and ff_ac3dsp_init_x86().
| void(* AC3DSPContext::sum_square_butterfly_int32)(int64_t sum[4], const int32_t *coef0, const int32_t *coef1, int len) |
Definition at line 129 of file ac3dsp.h.
Referenced by ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and sum_square_butterfly().
| void(* AC3DSPContext::sum_square_butterfly_float)(float sum[4], const float *coef0, const float *coef1, int len) |
Definition at line 132 of file ac3dsp.h.
Referenced by ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and sum_square_butterfly().
| int AC3DSPContext::out_channels |
Definition at line 135 of file ac3dsp.h.
Referenced by ff_ac3dsp_downmix(), ff_ac3dsp_downmix_fixed(), and ff_ac3dsp_init().
| int AC3DSPContext::in_channels |
Definition at line 136 of file ac3dsp.h.
Referenced by ff_ac3dsp_downmix(), ff_ac3dsp_downmix_fixed(), and ff_ac3dsp_init().
Definition at line 137 of file ac3dsp.h.
Referenced by ff_ac3dsp_downmix(), and ff_ac3dsp_init().
Definition at line 138 of file ac3dsp.h.
Referenced by ff_ac3dsp_downmix_fixed(), and ff_ac3dsp_init().
| void(* AC3DSPContext::apply_window_int16)(int16_t *output, const int16_t *input, const int16_t *window, unsigned int len) |
Apply symmetric window in 16-bit fixed-point.
| output | destination array constraints: 16-byte aligned |
| input | source array constraints: 16-byte aligned |
| window | window array constraints: 16-byte aligned, at least len/2 elements |
| len | full window length constraints: multiple of ? greater than zero |
Definition at line 151 of file ac3dsp.h.
Referenced by apply_mdct(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and ff_ac3dsp_init_x86().
1.8.6